登录
首页 >  数据库 >  MySQL

StoneDB主从切换实践方案

来源:SegmentFault

时间:2023-01-22 17:24:40 279浏览 收藏

知识点掌握了,还需要不断练习才能熟练运用。下面golang学习网给大家带来一个数据库开发实战,手把手教大家学习《StoneDB主从切换实践方案》,在实现功能的过程中也带大家重新温习相关知识点,温故而知新,回头看看说不定又有不一样的感悟!

StoneDB 的主从切换既可以手动切换,也可以自动切换,自动切换通常需要使用第三方中间件。本文介绍的是较为常用的中间件 Replication Manager,当 master 发生宕机时,可自动切换至 slave,保证业务正常运行,故障节点恢复后再加入主从。

服务器配置说明

IPMemoryCPUOS version
192.168.30.408G8CCentOS Linux release 7.9
192.168.30.418G8CCentOS Linux release 7.9
192.168.30.428G8CCentOS Linux release 7.9
192.168.30.4616G16CCentOS Linux release 7.9

注:主从环境中的各个服务器的配置一般情况下建议是一致的,但由于 StoneDB 不管重放 binlog,还是用于 OLAP 场景的查询,都是较消耗系统资源的,建议 StoneDB 配置略高于 MySQL。

主从环境说明

IPDATABASEROLEDB version
192.168.30.40MySQLmasterMySQL 5.7
192.168.30.41/Replication Manager/
192.168.30.42MySQLslaveMySQL 5.7
192.168.30.46StoneDBslaveStoneDB 5.7

注:MySQL 与 StoneDB 的版本建议保持一致。

推荐采用一主两从的架构,其中 StoneDB 不参与主从切换:

1)master(192.168.30.40)使用 InnoDB 引擎,可读写,提供 OLTP 场景的读写业务;

2)slave1(192.168.30.42)使用 InnoDB 引擎,只读,同时作为 standby,当 master 发生宕机时,可切换至 slave1,保证业务正常运行;

3)slave2(192.168.30.46)使用 Tianmu 引擎,只读,提供 OLAP 场景的读业务。

1、操作系统环境检查

操作系统环境检查的步骤在四个节点均需要执行。

1.1 关闭防火墙

# systemctl stop firewalld 
# systemctl disable firewalld

1.2 关闭SELINUX

# vim /etc/selinux/config
SELINUX = disabled

1.3 设置Swap分区

修改vm.swappiness的值为1,表示尽量不使用Swap。

# vi /etc/sysctl.conf
vm.swappiness = 1

1.4 修改操作系统的限制

# ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1031433
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65535
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 10240
cpu time               (seconds, -t) unlimited
max user processes              (-u) 1024
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited

修改操作系统的软硬限制
# vim /etc/security/limits.conf
* soft nofile 65535
* hard nofile 65535
mysql soft nproc 1028056
mysql hard nproc 1028056

1.5 创建用户

# groupadd mysql
# useradd -g mysql mysql
# passwd mysql

Replication Manager 节点无需创建,以上步骤执行完之后,重启操作系统。

2、部署MySQL

在 master 节点和 slave1 节点安装 MySQL。

2.1 下载安装包

https://downloads.mysql.com/archives/community/
从官网下载 MySQL 5.7 的安装包。

2.2 卸载mariadb

# rpm -qa|grep mariadb
mariadb-5.5.56-2.el7.x86_64
mariadb-server-5.5.56-2.el7.x86_64
mariadb-libs-5.5.56-2.el7.x86_64
# yum remove mariadb*
# rpm -qa|grep mariadb

2.3 上传tar包并解压

# tar -zxvf mysql-5.7.36-linux-glibc2.12-x86_64.tar.gz -C /usr/local/
# cd /usr/local/
# mv mysql-5.7.36-linux-glibc2.12-x86_64 mysql

2.4 创建目录

# mkdir -p /mysql/data/
# mkdir -p /mysql/log
# chown -R mysql:mysql /mysql/

2.5 配置参数文件 my.cnf

master

# vim /etc/my.cnf
[client]
port    = 3306
socket  = /mysql/data/mysql.sock

[mysqld]
port      = 3306
basedir   = /usr/local/mysql
datadir   = /mysql/data
socket    = /mysql/data/mysql.sock
pid_file  = /mysql/data/mysqld.pid
log_error = /mysql/log/mysqld.log
log_bin   = /mysql/log/mybinlog
server_id = 40
character_set_server = utf8mb4
collation_server = utf8mb4_general_ci
max_connections = 1000
binlog_format = row
default_storage_engine = innodb
read_only=0

innodb_buffer_pool_size = 4096000000
innodb_log_file_size = 1024000000
innodb_log_files_in_group = 3
innodb_io_capacity = 4000
innodb_io_capacity_max = 8000

#开启GTID模式
gtid_mode = on
enforce_gtid_consistency = 1

#并行复制
binlog_transaction_dependency_tracking = WRITESET
transaction_write_set_extraction = XXHASH64

slave1

# vim /etc/my.cnf
[client]
port    = 3306
socket  = /mysql/data/mysql.sock

[mysqld]
port      = 3306
basedir   = /usr/local/mysql
datadir   = /mysql/data
socket    = /mysql/data/mysql.sock
pid_file  = /mysql/data/mysqld.pid
log_error = /mysql/log/mysqld.log
log_bin   = /mysql/log/mybinlog
server_id = 42
character_set_server = utf8mb4
collation_server = utf8mb4_general_ci
max_connections = 1000
binlog_format = row
default_storage_engine = innodb
read_only=1

innodb_buffer_pool_size = 4096000000
innodb_log_file_size = 1024000000
innodb_log_files_in_group = 3
innodb_io_capacity = 4000
innodb_io_capacity_max = 8000

#开启GTID模式
gtid_mode = on
enforce_gtid_consistency = 1

#并行复制
slave_parallel_type = LOGICAL_CLOCK
slave_parallel_workers = 4

2.6 初始化实例

/usr/local/mysql/bin/mysqld --defaults-file=/etc/my.cnf --initialize --user=mysql

2.7 启动实例

/usr/local/mysql/bin/mysqld_safe --defaults-file=/etc/my.cnf --user=mysql &

注:管理员用户的临时密码在 mysqld.log 中,第一次登陆后需要修改管理员用户的密码。

3、部署StoneDB

3.1 下载安装包

https://stonedb.io/zh/docs/download/
从官网下载 StoneDB 5.7 的安装包。

3.2 上传tar包并解压

# cd /
# tar -zxvf stonedb-ce-5.7-v1.0.0.el7.x86_64.tar.gz

用户可根据安装规范将安装包上传至服务器,解压出来的目录是 stonedb57,示例中的安装路径是 /stonedb57。

3.3 检查依赖文件

# cd /stonedb57/install/bin
# ldd mysqld
# ldd mysql

如果检查返回有关键字"not found",说明缺少文件,需要安装对应的依赖包。例如:

libsnappy.so.1 => not found

在 Ubuntu 上使用命令 "sudo apt search libsnappy" 检查,说明需要安装 libsnappy-dev。在 RedHat 或者 CentOS 上使用命令 "yum search all snappy" 检查,说明需要安装 snappy-devel、snappy。

3.4 创建目录

mkdir -p /stonedb57/install/data
mkdir -p /stonedb57/install/binlog
mkdir -p /stonedb57/install/log
mkdir -p /stonedb57/install/tmp
mkdir -p /stonedb57/install/redolog
mkdir -p /stonedb57/install/undolog
chown -R mysql:mysql /stonedb57

3.5 配置参数文件 my.cnf

# vim /stonedb57/install/my.cnf
[client]
port    = 3306
socket  = /stonedb57/install/tmp/mysql.sock

[mysqld]
port      = 3306
basedir   = /stonedb57/install/
datadir   = /stonedb57/install/data
socket    = /stonedb57/install/tmp/mysql.sock
pid_file  = /stonedb57/install/data/mysqld.pid
log_error = /stonedb57/install/log/mysqld.log
log_bin   = /stonedb57/install/binlog/binlog
server_id = 46
character_set_server = utf8mb4
collation_server = utf8mb4_general_ci
max_connections = 1000
binlog_format = row
default_storage_engine = tianmu
read_only=1

innodb_buffer_pool_size = 2048000000
innodb_log_file_size = 1024000000
innodb_log_files_in_group = 3
innodb_io_capacity = 4000
innodb_io_capacity_max = 8000
innodb_log_group_home_dir   = /stonedb57/install/redolog/
innodb_undo_directory       = /stonedb57/install/undolog/
innodb_undo_log_truncate    = 1
innodb_undo_tablespaces     = 3
innodb_undo_logs            = 128

#开启GTID模式
gtid_mode = on
enforce_gtid_consistency = 1

#并行复制
slave_parallel_type = LOGICAL_CLOCK
slave_parallel_workers = 8  

3.6 初始化实例

/stonedb57/install/bin/mysqld --defaults-file=/stonedb57/install/my.cnf --initialize --user=mysql

3.7 启动实例

/stonedb57/install/bin/mysqld_safe --defaults-file=/stonedb57/install/my.cnf --user=mysql &

注:管理员用户的临时密码在 mysqld.log 中,第一次登陆后需要修改管理员用户的密码。

4、配置主从

4.1 创建复制用户

create user 'repl'@'%' identified by 'mysql123';
grant replication slave on *.* to 'repl'@'%';

4.2 备份主库

/usr/local/mysql/bin/mysqldump -uroot -pmysql123 --single-transaction --set-gtid-purged=on -B aa > /tmp/aa.sql

4.3 传输备份文件

scp /tmp/aa.sql root@192.168.30.42:/tmp
scp /tmp/aa.sql root@192.168.30.43:/tmp

注:如果数据较大,建议使用 mydumper.

4.4 slave1节点

/usr/local/mysql/bin/mysql -uroot -pmysql123 -S /mysqldb/data/mysql.sock
source /tmp/aa.sql

注:恢复前需要确保 gtid_executed 为空。

4.5 slave2节点

在恢复前,需要修改存储引擎,注释锁表语句。

sed -i 's/UNLOCK TABLES/-- UNLOCK TABLES/g' /tmp/aa.sql
sed -i 's/LOCK TABLES `/-- LOCK TABLES `/g' /tmp/aa.sql
sed -i 's/ENGINE=InnoDB/ENGINE=tianmu/g' /tmp/aa.sql

/stonedb57/install/bin/mysql -uroot -pmysql123 -S /stonedb57/install/tmp/mysql.sock
source /tmp/aa.sql

注:恢复前需要确保 gtid_executed 为空。

4.6 建立主从复制

slave1节点

CHANGE MASTER TO
MASTER_HOST='192.168.30.40',
MASTER_PORT=3306,
MASTER_USER='repl',
MASTER_PASSWORD='mysql123',
MASTER_AUTO_POSITION = 1;

start slave;
show slave status\G

slave2节点

CHANGE MASTER TO
MASTER_HOST='192.168.30.40',
MASTER_PORT=3306,
MASTER_USER='repl',
MASTER_PASSWORD='mysql123',
MASTER_AUTO_POSITION = 1;

start slave;
show slave status\G

5、配置Replication Manager

5.1 配置hosts文件

在所有节点都要配置

# vim /etc/hosts
192.168.30.40 HAMI01
192.168.30.41 HAMI02
192.168.30.42 HAMI03
192.168.30.46 HAST05

5.2 配置免密

在 Replication Manager 节点配置

ssh-keygen
ssh-copy-id HAMI01
ssh-copy-id HAMI03
ssh-copy-id HAST05

ssh HAMI01
ssh HAMI03
ssh HAST05

注:若 ssh 免密登录表示免密配置成功。

5.3 配置yum源

# vim /etc/yum.repos.d/signal18.repo
[signal18]
name=Signal18 repositories
baseurl=http://repo.signal18.io/centos/2.1/$releasever/$basearch/
gpgcheck=0
enabled=1

5.4 安装Replication Manager

# yum install -y replication-manager-osc
# rpm -qa|grep replication
replication-manager-osc-2.2.20-1.x86_64

5.5 主库创建监控用户

create user 'rep_monitor'@'%' identified by 'mysql123';
grant reload, process, super, replication slave, replication client, event ON *.* to 'rep_monitor'@'%';
grant select ON mysql.event to 'rep_monitor'@'%';
grant select ON mysql.user to 'rep_monitor'@'%';
grant select ON performance_schema.* to 'rep_monitor'@'%';

5.6 配置config.toml

# vim /etc/replication-manager/config.toml

# 集群名称
[StoneDB-HA]
# 主从节点
db-servers-hosts = "192.168.30.40:3306,192.168.30.42:3306,192.168.30.46:3306"
# 主节点
db-servers-prefered-master = "192.168.30.40:3306"
# 监控用户
db-servers-credential = "rep_monitor:mysql123"
db-servers-connect-timeout = 2
# 复制用户
replication-credential = "repl:mysql123"
# StoneDB不被用于切换
db-servers-ignored-hosts="192.168.30.46:3306"

##############
## FAILOVER ##
##############
# 故障自动切换
failover-mode = "automatic"
# 30s内再次发生故障不切换,防止硬件问题或网络问题
failover-time-limit=30

[Default]
#########
## LOG ##
#########
log-file = "/var/log/replication-manager.log"
log-heartbeat = false
log-syslog = false
monitoring-datadir = "/var/lib/replication-manager"
log-level=1

replication-multi-master = false
replication-multi-tier-slave = false
failover-readonly-state = true
http-server = true
http-bind-address = "0.0.0.0"
http-port = "10001"

5.7 启动Replication Manager

# systemctl start replication-manager
# netstat -lntp|grep replication
tcp6       0      0 :::10001                :::*                    LISTEN      13128/replication-m 
tcp6       0      0 :::10005                :::*                    LISTEN      13128/replication-m

5.8 WEB登录

http://192.168.30.41:10001
默认用户名密码为 admin/repman

file

6、建议项

1)建议设置为 GTID 模式;

2)建议主从配置成半同步模式;

3)StoneDB 不参与主从切换。

以上就是本文的全部内容了,是否有顺利帮助你解决问题?若是能给你带来学习上的帮助,请大家多多支持golang学习网!更多关于数据库的相关知识,也可关注golang学习网公众号。

声明:本文转载于:SegmentFault 如有侵犯,请联系study_golang@163.com删除
相关阅读
更多>
最新阅读
更多>
课程推荐
更多>